Account
Language
Currency
0
Cart

Products

Your shopping cart is empty!

PNB UV/LED PolyFlex Gel LUX, Clear, 50 ml

PNB UV/LED PolyFlex Gel LUX, Clear, 50 ml

UV/LED PolyFlex Gel LUX, Clear – has a translucent texture, is quite economical and multifunctional, used for both art modeling and strengthening weakened nails, that are prone to brittleness. UV/LED...
AVAILABLE SOON Product Code: 4224

UV/LED PolyFlex Gel LUX, Clear – has a translucent texture, is quite economical and multifunctional, used for both art modeling and strengthening weakened nails, that are prone to brittleness.

UV/LED PolyFlex Gel LUX is a hybrid of 2 modeling systems in a completely new formula with a more docile and flexible structure! The gel has absolutely no graininess and looseness. It will be much more convenient and faster for a beginner to work with such material. UV/LED PolyFlex Gel LUX – this material is intended for modeling extended nails of salon length and minor repairs of natural nails. Indispensable for strengthening a weak, thinned and sensitive nail plate. Since this product belongs to low-temperature materials, it absolutely does not hurt in the lamp (even in summer), and this, in turn, prevents burns of the nail plate. UV/LED PolyFlex Gel LUX can be applied simultaneously on all fingers, without fixing each separately, which significantly reduces the working time. The material does not wear out and has 100% polymerization, when the recommended thickness of the layer is applied.

BENEFITS:

  1. Ideal for restoring the architecture of the nail plate, raising the free edge and correcting the shape.
  2. Flawlessly keeps the square shape in the strengthening technique, due to which the angles remain unchanged.
  3. After polymerization, the material acquires a high density, therefore, during the sawing process, its heavy dust does not fly in the air, settles quickly.
  4. Minimum filing.
  5. There is no unpleasant odor.
  6. Does not hurt in a lamp.
  7. Hypoallergenic components – safety for the health of the master and the client.
  8. There is almost no sticky layer.

MODE OF APPLICATION:

  1. Prepare the nail plate with PNB buff, remove the gloss.
  2. Apply the auxiliary fluids: Nail Dehydrator and Bond Control to the entire nail plate. When working with a wet nail plate, use an Acid Primer.
  3. Rub in Universal Base PNB / Scotch Base PNB and cure in the lamp for 1 minute.
  4. Using a spatula/brush-spatula, apply a small amount of polygel to the nail plate and distribute.
  5. Model the desired nail architecture with a brush/brush-spatula dipped in Polygel solution PNB. Press the arch for 2-3 sec. with a special clamp, dry in a lamp for 2 min. Compression of the salon arch – for 8-15 sec., depending on the lamp power. When building nails with polygel, it is necessary to set the forms or tips on the nails.
  6. File the polygel with a 180 or 240 grit file and buff it.
  7. Apply color gel polish in 1-2 coats. Cure material for 60 sec. Complete the design.
  8. Apply the PNB top.
  9. RECOMMENDATIONS:

    For full polymerization, the minimum layer thickness of the material is 1-1.2 mm, and the maximum thickness is 2 mm. Full polymerization time for UV/LED PolyFlex Gel LUX in a PNB combi lamp is 2 minutes. Curing in a CCFL lamp is not recommended. We recommend removing the residual minimal stickiness of the material after polymerization with GEL CLEANSER PNB.

Write a review

Note: HTML is not translated!
    Bad           Good