PNB UV/LED 4 in 1 BIAB GEL, Jolie, 17 ml

4 in 1 BIAB Gel PNB 4 in 1 is a primer, base, gel, and color in one bottle.

4 in 1 BIAB Gel PNB is a type of gel strengthening applied directly to the natural nail to promote its growth and reduce the risk of breakage. The product does not require the separate use of a primer or base, as they are already present in the product. Thanks to this, 4 in 1 BIAB Gel PNB will become an indispensable assistant for every nail technician, as it significantly reduces the time of manicure and saves money.

UV/LED 4 in 1 BIAB GEL PNB, Jolie pink with silver shimmer - is the island of calm that you will choose when you want something classic and sophisticated. Not too bright, perfectly sustained pink shade Jolie will give your manicure all its charm and beauty.

Advantages:

• Saves time and money: the product does not require a primer, base, or other products, as it creates a hard material strengthening right away with the color;
• It does not chip, gives nails the stability that they never had by nature and helps to grow their length;
• Suitable for thin nails;
• You can create a full coverage with one product;
• 100% gel system;
• Suitable for any design and length;
• Unlike BIAB analogs in the world that contain acrylic acid, 4 in 1 BIAB Gel PNB is completely hypoallergenic and safe for use by nail technicians and their clients;
• Fast and reliable polymerization due to several photoinitiators in the composition. The degree of polymerization will be more complete, and this guarantees a lower probability of allergic reactions due to underpolymerized molecules;
• The material does not cause a strong burning sensation in the lamp, except for thin sensitive nails.
• It has good adhesion, while maintaining some elasticity of the material;
• Convenient thixotropic consistency, which does not spread, but works in tandem with the nail technician's brush to create a flawless architecture;
• Resistant to LEDs and UV light;
• Wearable for up to 4 weeks.

Technique of working with hard material on natural nails:

• Clean manicure and good preparation (preferably not with a buff, but with a soft file);
• Nails should be healthy and not exhausted;
• The thickness of the material at the end should be at least 1 mm;
• On soft and elastic nails, you need to file the nail from the inside to avoid delamination. The cut section of the material should be covered with a top without a sticky layer.

Technique of strengthening the "sides" with 4 in 1 BIAB Gel PNB:

1. Remove the old coating, do a manicure, but do not remove the length of the nail.
2. Prepare the nail plate for the coating, disinfect it with Nail Prep PNB.
3. Apply a very thin layer (base) of 4 in 1 BIAB Gel PNB with rubbing movements, polymerize for 60 seconds.
4. Perform the free edge strengthening using the "sides" technique.
5. Spread 4 in 1 BIAB Gel PNB along the free edge from stress zone No. 1 and on the ingrowth points to stress zone No. 2, the thickness of the nail end along the entire perimeter should be 1.5 mm. Stress zones are those areas of the nail that are most affected by pressure and load during regrowth.
6. Cover with a modeling layer 4 in 1 BIAB Gel PNB (fill in the sides and create the necessary architecture). When drying, use the half power mode. Polymerize for 90-120 seconds.
7. Remove the sticky layer with Gel Cleanser PNB and remove the lengths.
8. Cover with gel polish and make a design (optional).
9. Apply Express/Protect/Powder/Shock/Art Top PNB.

Important!

1* BIAB coating does not contain harmful adhesive components, adhesion in this coating occurs due to the successful volume of the material in stressful areas, so the use of the "sides" technique is a prerequisite for obtaining good results with the material without using a primer.

2* You can use 4 in 1 BIAB Gel PNB with your usual gel-curing techniques in the vial, provided you use a primer and an elastic base substrate.

Application method:

1. Remove the old coating, perform a manicure, but do not remove the length of the nail.
2. Prepare the nail plate for coating, disinfect it with Nail Prep PNB.
3. Apply a very thin layer (base) of 4 in 1 BIAB Gel PNB with rubbing movements, polymerize for 60 seconds.
4. Perform the free edge strengthening using the "sides" technique.
5. Spread 4 in 1 BIAB Gel PNB along the free edge from stress zone No. 1 and on the ingrowth points to stress zone No. 2, the thickness of the nail end along the entire perimeter should be 1.5 mm. Stress zones are those areas of the nail that are most affected by pressure and load during regrowth.
6. Cover with a modeling layer 4 in 1 BIAB Gel PNB (fill in the sides and create the necessary architecture). When drying, use the half power mode. Polymerize for 90-120 seconds.
7. Remove the sticky layer with Gel Cleanser PNB and remove the lengths.
8. Cover with gel polish and make a design (optional).
9. Apply Express/Protect/Powder/Schock/Art Top PNB.